Premium sorting truck
The production company Russian truck has approved production standards for its sorting trucks, which can be mounted on various chassis of cars. These developments are currently the best on the market in terms of price and quality, combining reliability, lightness and design.
- Material-Finnish steel SSAB STRENX960MCE
- Place under the manipulator
- Conics have a 5-angle profile tapering upwards
- Weight of the cone-120 kg
- Permissible load on the base of the cone with a uniform load of up to 9 tons
- Aluminum front shield with trap (6 mm thick stainless steel on bolted connections), consists of set aluminum panels, so it has high maintainability (if damaged, you do not need to replace the entire shield, you can replace one or more panels)
- The coefficient of strength is 1.5 times higher than the steel analogue, in the section it has 2 Walls, 3 mm thick, plus internal longitudinal stiffeners 3 mm thick. Hinged connection of four jumpers of the front cone with an aluminum shield.
- Painting: 1 layer - with converter,
2 layer alkyd-silicone glossy enamel
- 2 belt winches
- Tool box 500x500x500mm
- Operator's ladder for lifting to the truck
- The flooring is made of moisture-resistant plywood or corrugated metal sheet 3 mm
- Wings are metal or completely made of plastic
- The side decking behind the safety shield is made of corrugated metal
- Bolted connections (jumpers, fasteners, cones, decking, wings, superframe, frame and shield) - bolts of strength class 10.9 with self-locking nuts.
- Removable stop under the knee and grab hydraulic manipulator.
- Grapple protection
- The superframe is made of a perforated U-shaped profile 160x8 mm SSAB STRENX, the wings are combined, consisting of plastic with corrugated aluminum 3 mm thick. + the side decking behind the safety shield is made of corrugated aluminum
Increase in price by 204 000,00 rubles with VAT
- Retractable telescopic manipulator console
Made of high-strength imported steelstrenx. Made in the form of an I-beam, 25 mm thick.
For extension, an imported Alucar hydraulic cylinder is used.
Increase in price by 357 000,00 rubles with VAT
- The trap is assembled from 6 mm thick stainless steel on bolted joints.
Price increase by 51,000 rubles including VAT
- The wings are combined, consisting of plastic with corrugated aluminum 3 mm thick. + the side decking behind the safety shield is made of corrugated aluminum.
Increase in price by 41,000 rubles including VAT
- Increasing the height of the cones to a height of 2,650 mm steel SSAB STRENX960MCE, the wall thickness of the cone is 4 mm, the base thickness of the cone is 5 mm.
Increase in price by 11 000,00 rubles with VAT for 1 Konik
This offer is not a public offer.
Complete sets and prices agree with the sales department of LLC MC "Russian truck".
|Nomin. engine power (gross), HP|
|Max climbed. Power (net), hp|
|P/O main transmission|
|TSU (SSU height)|
|Lifting capacity, t|
|V platf, cubic meters|
|Number of axles/wheels|
|Length, mm||up to 8000|
|Height, mm||up to 2750|
|Front/rear wheel tracks, mm|
|Curb weight of the vehicle, kg|
|Gross vehicle weight, kg|
|Load, kg-on the front axle|
|Load, kg-on the rear axle|
|Purpose of the vehicle|