Optima sorting truck
- Material-Finnish steel SSAB STRENX700MCE
- Length of transported assortment up to 6400 mm
- Place under the hydraulic manipulator
- Conics have a 5-angle profile tapering upwards
- Weight of the cone-110 kg
- Permissible load on the base of the cone with a uniform load of up to 9 tons
- Prosechny front shield with trap, made of steel S700 thickness 3 mm, height 2400-2600 mm
- 1 layer - with converter,
- 2 layer alkyd-silicone glossy enamel
- 2 belt winches
- Metal box for tools 500x500x500mm
- Operator's ladder for lifting to the truck
- The superframe is made of profile pipe 180x100 wall thickness 8 mm,
- The flooring is made of moisture-resistant plywood or corrugated metal sheet 3 mm
- Wings are metal or completely made of plastic
- The side decking behind the safety shield is made of corrugated metal
- Removable stop under the knee and hydraulic manipulator grab
Aluminum front shield without trap:
- consists of composite aluminum panels, due to which it has high maintainability (if damaged, you do not need to replace the entire shield, you can replace one or more panels)
- the coefficient of strength is 1.5 times higher than the steel analogue, in the section it has 2 Walls, 3 mm thick, plus internal longitudinal stiffeners 3 mm thick. Hinged connection of four jumpers of the front cone with an aluminum shield.
Price increase by 204,000 rubles including VAT
The trap is assembled from 6 mm thick stainless steel on bolted joints.
Price increase by 51,000 rubles including VAT
The wings are combined, consisting of plastic with corrugated aluminum 3 mm thick. + the side decking behind the safety shield is made of corrugated aluminum.
Increase in price by 41,000 rubles including VAT
Increasing the height of the cones to a height of 2,650 mm steel SSAB STRENX960MCE, the wall thickness of the cone is 4 mm, the base thickness of the cone is 5 mm.
Increase in price by 11 000,00 rubles with VAT for 1 Konik
Retractable telescopic manipulator console
Made of high-strength imported steelstrenx. Made in the form of an I-beam, 25 mm thick.
For extension, an imported Alucar hydraulic cylinder is used.
Increase in price by 357 000,00 rubles with VAT
This offer is not a public offer.
Complete sets and prices agree with the sales department of LLC MC "Russian truck".
|Nomin. engine power (gross), HP|
|Max climbed. Power (net), hp|
|P/O main transmission|
|TSU (SSU height)|
|Lifting capacity, t|
|V platf, cubic meters|
|Number of axles/wheels|
|Length, mm||up to 6400|
|Front/rear wheel tracks, mm|
|Curb weight of the vehicle, kg|
|Gross vehicle weight, kg|
|Load, kg-on the front axle|
|Load, kg-on the rear axle|
|Purpose of the vehicle|
|Conics||5-sided profile tapering upwards|