HYDRONIC B5W S
Liquid heater hydronic B5W S 12V with mounting kit and without control device
Optimal for engines with a volume of more than 2.5 liters.
Brief description of the work
Autonomous liquid heater hydronic is designed for preheating the engine coolant in the cold season. The installed heater is connected to the fuel, cooling systems of the car and to the power supply of the wagon network. The engine heater is started remotely by means of the control device or by the time set on the timer. When starting, the heater pump supplies fuel to the combustion chamber, where a fuel-air mixture is formed, ignited by means of an incandescent pin. The resulting thermal energy through the heat exchanger heats the coolant, which passes through the small circuit of the engine due to the operation of the liquid pump of the heater. When the coolant is heated to 85 degrees, the heater goes into low power mode. After working out the specified time (30-40 minutes) or, having received a command from the control device, the heater turns off. Your car is warmed up and ready to go!
Hydronic can be used together with a running engine while driving. In this case, the heater preheats the engine coolant to operating temperature.
Kit composition
The kit includes: autonomous heater, fuel pump, liquid pump, mounting kit (fasteners, wiring kit, hoses, connectors, fuel line, fuel intake, air intake, exhaust gas removal kit), documentation disc, warranty card.
Additionally, you must select control panel
Production: Germany
Warranty: 1 year
This offer is not a public offer.
Complete sets and prices agree with the sales department of LLC MC "Russian truck".
Fuel type |
petrol |
Voltage |
12V |
Liquid pump design |
separate, remote |
Heating capacity |
1500 to 5000 Watts |
Liquid pump performance |
900±100 L/H |
Power consumption |
10 to 37 Watts |
Fuel consumption |
not more than 0.69 L / H |
Dimensions of the heater Lxwxh |
220x86x98 mm |
Heater weight |
2.3 kg |
Kit weight |
8.3 kg |